|
|
 |
|
 |
|
 |
506B Stump Road
Montgomeryville, PA
18936, USA
TOM O'MALLEY:
Email id: tomalley@apantec.com
Tel No.: 267-436-3992
CRAIG MILLS:
Email id: cmills@apantec.com
Tel No.: 215-362-5340
Fax: 215-362-5343 |
|
|
 |
|
 |
|
|
 |
|
 |
|
 |
 |
Tuesday, May 20, 2008 |
| Korea - Mexico - Saudi Arabia PET System Contracts |
| More |
|
 |
Tuesday, October 02, 2007 |
| Apantec wins two more orders for P.E.T. Radiation monitoring systems! |
| More |
|
|
|
 |
|
 |
|
|
|
| [-- BACK
to Products --] |
| ID100 Ion Chamber Detector |
| The ID100
Ion Chamber detector is a sealed ion chamber
probe packaged in a cylindrical aluminum enclosure
and fitted with a multi-pin circular connector
for interconnection to an Apantec
RAM series display unit. The ID100
is used on area monitoring applications with transient
or burst radiation levels, or those channels with
anticipated high activity such as containment
/ post accident detection. |
The ID100
includes a current-to-frequency converter for
converting the current output signal from the
ion chamber sensor into pulses suitable for counting
by the RAM series display unit input circuitry.
The RAM display and control unit provides Ethernet
and serial RS485 communications for networking
to a central computer using the Apantec
DORIS software. |
| The ID100 measures a range of
100 uR/hr to 100 R/hr. |
| The ID100 is
also available with an internal isotopic check source.
These instruments are designated as the models ID100C. |
| For high range and high TID applications, please
refer to the Apantec model CIC100 Ion Chamber detector
design. |
|
|
Detector Type: |
Ion chamber, sealed |
|
Range: |
100 uR/hr to 100 R/hr |
|
Energy Response: |
±20% from 80 keV to 2.5 MeV Referenced
to 137Cs |
|
Saturation: |
will not saturate in fields up to 1,000
R/hr |
|
Accuracy: |
±20% over entire range |
|
Environment: |
14°F to 122°F
(-10°C to 50°C)
0-95% RH |
| Operating
Voltage: |
+12 VDC Biasing voltages internally generated |
| Dimensions: |
12.5 in. (317.5 mm) L x
2.5 in. (63.5 mm) dia. |
| Weight:
|
3 lb (1.35 kg) nominal |
| Note:
The ID100 and ID100C are also available with
SI Units of measurement (Sv/hr(H*10) |
|
| [-- BACK
to Products --] |
|
|
| © 2005; Apantec,LLC. All Rights Reserved. |
|
|